Provides a way for recording all or a portion of DiscArchive content on a single disc. More...

#include <PrimoBurnerAPI.h>

Public Member Functions
virtual DiscLayoutCallback *	callback () const =0
	Gets the current callback set in DiscArchive. More...

virtual bool_t	close ()=0
	Finalizes the write operations. More...

virtual DataFile *	content () const =0
	Gets the layout that will be written on the target disc. More...

virtual DataFile *	contentOnDisc () const =0
	Gets the description of the layout already present on the target disc before the current layout is written to it. More...

virtual Device *	device (void) const =0
	Gets the Device object which should be used for burning. More...

virtual const ErrorInfo *	error () const =0
	Gets error information about the last operation. More...

virtual DataFile *	footer () const =0
	Gets the footer layout to be recorded after the content layout is written on disc. More...

virtual int32_t	imageSize () const =0
	Gets the number of blocks needed on the target disc to write the content and the footer. More...

virtual int32_t	mediaFreeSpace () const =0
	Gets the available space in blocks on the target disc before calling any of the write methods. More...

virtual bool_t	open ()=0
	Prepares the DiscLayout object for recording the selected content and footer to the target disc. More...

virtual int32_t	sessionStartAddress () const =0
	Sets the address at which content recording will begin on the target disc. More...

virtual void	setCallback (DiscLayoutCallback *callback)=0
	Sets a callback object to receive notifications from DiscArchive. More...

virtual void	setDevice (Device *device)=0
	Sets a Device object which should be used for burning. More...

virtual void	setFooter (DataFile *footer)=0
	Sets the footer layout to be recorded after the content layout is written on disc. More...

virtual void	setSessionStartAddress (int32_t address)=0
	Sets the address at which content recording will begin on the target disc. More...

virtual void	setVolumeLabel (const char_t *volumeLabel)=0
	Sets the image volume label. More...

virtual const char_t *	volumeLabel () const =0
	Gets the volume label of the data image. More...

virtual bool_t	writeContent ()=0
	Writes the selected content on the target disc. More...

virtual bool_t	writeFileSystem (bool_t dismountVolume=0)=0
	Writes the file system describing the content of the disc. More...

virtual bool_t	writeFooter ()=0
	Writes the footer on the target disc. More...

Public Member Functions inherited from Reference
virtual int32_t	release () const =0
	Releases the instance. More...

virtual int32_t	retain () const =0
	Retains the instance. More...

virtual int32_t	retainCount () const =0
	Returns the current reference count. More...

Detailed Description

Provides a way for recording all or a portion of DiscArchive content on a single disc.

Remarks: A DiscLayout object may be obtained only by calling DiscArchive::prepareLayout(). Once obtained the DiscLayout is responsible for writing its content and footer on the target disc, as well as the file system that describes the recorded content and footer.

See the example in DiscArchive for a simple demonstration of how to use DiscArchive and DiscLayout together.

Member Function Documentation

virtual DiscLayoutCallback* callback ( ) const

pure virtual

Gets the current callback set in DiscArchive.

Returns: The callback previously set by setCallback or NULL if no callback is set.

See Also: setCallback

virtual bool_t close ( )

pure virtual

Finalizes the write operations.

Remarks: This method must be called after writeFileSystem() to complete the write sequence.

Returns: TRUE if the operation is successful, FALSE otherwise.

See Also: writeFileSystem; open

virtual DataFile* content ( ) const

pure virtual

Gets the layout that will be written on the target disc.

Returns: A pointer to a DataFile that describes the content layout to be written.

See Also: DiscArchive::content

virtual DataFile* contentOnDisc ( ) const

pure virtual

Gets the description of the layout already present on the target disc before the current layout is written to it.

Returns: A pointer to a DataFile that describes the existing layout on the disc.

virtual Device* device ( void ) const

pure virtual

Gets the Device object which should be used for burning.

Returns: A pointer to a Device object or NULL if no device is set.

See Also: setDevice

virtual const ErrorInfo* error ( ) const

pure virtual

Gets error information about the last operation.

Returns: A pointer to an ErrorInfo object.

virtual DataFile* footer ( ) const

pure virtual

Gets the footer layout to be recorded after the content layout is written on disc.

Remarks: When a DiscLayout object is created using DiscArchive.prepareLayout(), its footer is a copy of the footer defined originally for the DiscArchive object. It is possible to set a different footer for each DiscLayout object.

Returns: A pointer to a DataFile object that describes the footer layout.

See Also: footer

virtual int32_t imageSize ( ) const

pure virtual

Gets the number of blocks needed on the target disc to write the content and the footer.

Remarks: This method should be used after the DiscLayout::open(), otherwise it will return 0.

Returns: The number of blocks needed to write the content and the footer; 0 if the DiscLayout is not opened.

See Also: open

virtual int32_t mediaFreeSpace ( ) const

pure virtual

Gets the available space in blocks on the target disc before calling any of the write methods.

Remarks: This method should be used after the DiscLayout::open(), otherwise it will return 0.

Returns: The number of available blocks on the target disc.; 0 if the DiscLayout is not opened.

See Also: open

virtual bool_t open ( )

pure virtual

Prepares the DiscLayout object for recording the selected content and footer to the target disc.

Remarks: This method must be called before writeContent(), writeFooter() and writeFileSystem().

Returns: TRUE The operation is succeeded.; FALSE The operation failed. Check the error() method.

See Also: writeContent; writeFooter; writeFileSystem; close

virtual int32_t sessionStartAddress ( ) const

pure virtual

Sets the address at which content recording will begin on the target disc.

Returns: LBA

virtual void setCallback ( DiscLayoutCallback * callback )

pure virtual

Sets a callback object to receive notifications from DiscArchive.

Parameters

callback A pointer to an object that implements the DiscArchiveCallback interface.

See Also: callback

virtual void setDevice ( Device * device )

pure virtual

Sets a Device object which should be used for burning.

Parameters

device A pointer to a Device object. The device is retained by AudioCD.

See Also: device

virtual void setFooter ( DataFile * footer )

pure virtual

Sets the footer layout to be recorded after the content layout is written on disc.

Parameters

footer A pointer to a DataFile object that describes the footer layout. The DataFile object is retained by DiscLayout.

Remarks: When a DiscLayout object is created using DiscArchive.prepareLayout(), its footer is a copy of the footer defined originally for the DiscArchive object. It is possible to set a different footer for each DiscLayout object.

See Also: footer

virtual void setSessionStartAddress ( int32_t address )

pure virtual

Sets the address at which content recording will begin on the target disc.

Parameters

address LBA

Remarks: The session start address may be changed if necessary but this should be done before calling the open() method.

virtual void setVolumeLabel ( const char_t * volumeLabel )

pure virtual

Sets the image volume label.

Parameters

volumeLabel The maximum length allowed for the volume label is 32 characters. Only capital letters from A to Z, digits from 0 to 9, and the special characters _ (underscore) are allowed.

virtual const char_t* volumeLabel ( ) const

pure virtual

Gets the volume label of the data image.

Returns: A null-terminated string

virtual bool_t writeContent ( )

pure virtual

Writes the selected content on the target disc.

Returns: TRUE if the operation is successful, FALSE otherwise.

See Also: content

virtual bool_t writeFileSystem ( bool_t dismountVolume = 0 )

pure virtual

Writes the file system describing the content of the disc.

Parameters

dismountVolume Indicates whether to dismount the volume after the burning. The default value is FALSE.

Remarks: The file system is automatically determined based on the written content and footer as well as any previously loaded data (from previous recording sessions). This method must be called after the content and the footer are written (writeContent() and writeFooter()).

Returns: TRUE if the operation is successful, FALSE otherwise.

See Also: content; footer; writeContent; writeFooter

virtual bool_t writeFooter ( )

pure virtual

Writes the footer on the target disc.

If no footer is set for the current layout this method has no effect.

Returns

TRUE The operation is successful, FALSE otherwise.

    @see footer
    @see setFooter

Public Member Functions

Detailed Description

Member Function Documentation