| Enumerator |
|---|
| Success | Success.
|
| IoProcessTerminated | I/O process terminated.
|
| OperationInProgress2 | Operation in progress.
|
| CleaningRequested | Cleaning requested.
|
| NoSeekComplete | No seek complete.
|
| UnitNotReady | Logical unit not ready, cause not reportable.
|
| InProcessOfBecomingReady | Logical unit is in process of becoming ready.
|
| InitializingCommandRequired | Logical unit not ready, initializing cmd.
required.
|
| ManualInterventionRequired | Logical unit not ready, manual intervention required.
|
| FormatInProgress2 | Logical unit not ready, format in progress.
|
| FormatInProgress | Logical unit not ready, format in progress.
|
| OperationInProgress | Logical unit not ready, operation in progress.
|
| LongWriteInProgress | Logical unit not ready, long write in progress.
|
| SelfTestInProgress | Logical unit not ready, self-test in progress.
|
| NotRespondToSelection | Logical unit does not respond to selection.
|
| NoReferencePositionFound | No reference position found.
|
| CommunicationFailure | Logical unit communication failure.
|
| CommunicationTimeout | Logical unit communication timeout.
|
| CommunicationParityError | Logical unit communication parity error.
|
| CommunicationCRCError | Logical unit communication crc error (Ultra-DMA/32).
|
| TrackFollowingError | Track following error.
|
| TrackingServoFailure | Tracking servo failure.
|
| FocusServoFailure | Focus servo failure.
|
| SpindleServoFailure | Spindle servo failure.
|
| HeadSelectFault | Head select fault.
|
| ErrorLogOverflow | Error log overflow.
|
| Warning | Warning.
|
| SpecifiedTemperatureExceeded | Warning, specified temperature exceeded.
|
| EnclosureDegraded | Warning, enclosure degraded.
|
| BackgroundSelfTestFailed | Warning, background self-test failed.
|
| BackgroundPreScanMediumError | Warning, background pre-scan detected medium error.
|
| BackgroundMediumScanMediumError | Warning, background medium scan detected medium error.
|
| WriteError | Write error.
|
| WriteErrorRecoveredWithAutoRealloc | Write error, recovered with auto-reallocation.
|
| WriteErrorAutoReallocFailed | Write error, auto-reallocation failed.
|
| WriteErrorRecommendReassignment | Write error, recommend reassignment.
|
| WriteErrorRecoveryNeeded | Write error, recovery needed.
|
| WriteErrorRecoveryNeeded2 | Write error, recovery needed.
|
| WriteErrorRecoveryFailed | Write error, recovery failed.
|
| WriteErrorLossOfStreaming | Write error, loss of streaming.
|
| WriteErrorPaddingBlocksAdded | Write error, padding blocks added.
|
| DefectsInErrorWindow | Defects in error window.
|
| UnrecoveredReadError | Unrecovered read error.
|
| ReadRetriesExhausted | Read retries exhausted.
|
| ErrorTooLongToCorrect | Error too long to correct.
|
| LecUncorrectableError | L-ec uncorrectable error.
|
| CircUnrecoveredError | CIRC unrecovered error.
|
| ErrorReadingUpcEan | Error reading upc/ean number.
|
| ErrorReadingIsrc | Error reading ISRC number.
|
| ReadErrorLossOfStreaming | Read error, loss of streaming.
|
| RandomPositioningError | Random positioning error.
|
| RandomPositioningError2 | Random positioning error.
|
| MechanicalPositioningError | Mechanical positioning error.
|
| MechanicalPositioningError2 | Mechanical positioning error.
|
| PositioningErrorDetected | Positioning error detected by read of medium.
|
| RecoveredDataNoErrorCorrectionApplied | Recovered data with no error correction applied.
|
| RecoveredDataWithRetries | Recovered data with retries.
|
| RecoveredDataPositiveHeadOffset | Recovered data with positive head offset.
|
| RecoveredDataNegativeHeadOffset | Recovered data with negative head offset.
|
| RecoveredDataRetriesCircApplied | Recovered data with retries and/or CIRC applied.
|
| RecoveredDataPreviousSectorID | Recovered data using previous sector id.
|
| RecoveredDataWithoutEccRecommendReassignment | Recovered data without ECC, recommend reassignment.
|
| RecoveredDataWithoutEccRecommendRewrite | Recovered data without ECC, recommend rewrite.
|
| RecoveredDataWithoutEccDataRewritten | Recovered data without ECC, data rewritten.
|
| RecoveredDataErrorCorrectionApplied | Recovered data with error correction applied.
|
| RecoveredDataErrorCorrectionRetriesApplied | Recovered data with error correction and retries applied.
|
| RecoveredDataAutoReallocated | Recovered data, data auto-reallocated.
|
| RecoveredDataWithCirc | Recovered data with CIRC.
|
| RecoveredDataWithLec | Recovered data with L-ec.
|
| RecoveredDataRecommendReassignment | Recovered data, recommend reassignment.
|
| RecoveredDataRecommendRewrite | Recovered data, recommend rewrite.
|
| RecoveredDataWithLinking | Recovered data with linking.
|
| ParameterListLength | Parameter list length error.
|
| SynchronousDataTransferError | Synchronous data transfer error.
|
| MiscompareDuringVerifyOperation | Miscompare during verify operation.
|
| InvalidCommandOperationCode | Invalid command operation code.
|
| LbaOutOfRange | Logical block address out of range.
|
| InvalidElementAddress | Invalid element address.
|
| InvalidAddressForWrite | Invalid address for write.
|
| InvalidWriteCrossingLayerJump | Invalid write crossing layer jump.
|
| IllegalFunction | Illegal function.
|
| InvalidFieldInCDB | Invalid field in CDB.
|
| NotSupported | Logical unit not supported.
|
| InvalidFieldInParameterList | Invalid field in parameter list.
|
| ParameterNotSupported | Parameter not supported.
|
| ParameterValueInvalid | Parameter value invalid.
|
| ThresholdParametersNotSupported | Threshold parameters not supported.
|
| InvalidReleaseOfPersistentReservation | Invalid release of persistent reservation.
|
| WriteProtected | Write protected.
|
| HardwareWriteProtected | Hardware write protected.
|
| SoftwareWriteProtected | Logical unit software write protected.
|
| AssociatedWriteProtect | Associated write protect.
|
| PersistentWriteProtect | Persistent write protect.
|
| PermanentWriteProtect | Permanent write protect.
|
| ConditionalWriteProtect | Conditional write protect.
|
| MediumChanged | Not ready to ready change, medium may have changed.
|
| ImportOrExportElementAccessed | Import or export element accessed.
|
| FormatLayerMayHaveChanged | Format-layer may have changed.
|
| PowerOnReset | Power on, reset, or bus device reset occurred.
|
| PowerOnOccurred | Power on occurred.
|
| BusResetOccurred | Bus reset occurred.
|
| BusDeviceResetFunctionOccurred | Bus device reset function occurred.
|
| DeviceInternalReset | Device internal reset.
|
| ParametersChanged | Parameters changed.
|
| ModeParametersChanged | Mode parameters changed.
|
| LogParametersChanged | Log parameters changed.
|
| ReservationsPreempted | Reservations preempted.
|
| CommandSequenceError | Command sequence error.
|
| CurrentProgramAreaIsNotEmpty | Current program area is not empty.
|
| CurrentProgramAreaIsEmpty | Current program area is empty.
|
| InsufficientTimeForOperation | Insufficient time for operation.
|
| CommandsClearedByAnotherInitiator | Commands cleared by another initiator.
|
| IncompatibleMedium | Incompatible medium installed.
|
| IncompatibleMedium2 | Incompatible medium installed.
|
| CannotReadUnknownFormat | Cannot read medium, unknown format.
|
| CannotReadUnknownFormat2 | Cannot read medium, unknown format.
|
| CannotReadIncompatibleFormat | Cannot read medium incompatible format.
|
| CannotReadIncompatibleFormat2 | Cannot read medium, incompatible format.
|
| CleaningCartridgeInstalled | Cleaning cartridge installed.
|
| CleaningCartridgeInstalled2 | Cleaning cartridge installed.
|
| CannotWriteUnknownFormat | Cannot write medium unknown format.
|
| CannotWriteUnknownFormat2 | Cannot write medium, unknown format.
|
| CannotWriteIncompatibleFormat | Cannot write medium incompatible format.
|
| CannotWriteIncompatibleFormat2 | Cannot write medium, incompatible format.
|
| CannotFormatIncompatibleMedium | Cannot format medium incompatible medium.
|
| CannotFormatIncompatibleMedium2 | Cannot format medium, incompatible medium.
|
| CleaningFailure | Cleaning failure.
|
| CleaningFailure2 | Cleaning failure.
|
| ApplicationCodeMismatch | Cannot write.
Application code mismatch.
|
| CurrentSessionNotFixatedForAppend | Current session not fixated for append.
|
| MediumNotFormatted | Medium not formatted.
|
| CannotWriteUnsupportedMediumVersion | Cannot write medium unsupported medium version.
|
| CannotWriteUnsupportedMediumVersion2 | Cannot write medium, unsupported medium version.
|
| MediumFormatCorrupted | Medium format corrupted.
|
| FormatCommandFailed | Format command failed.
|
| ZonedFormattingFailedDueToSpareLinking | Zoned formatting failed due to spare linking.
|
| NoDefectSpareLocationAvailable | No defect spare location available.
|
| RoundedParameter | Rounded parameter.
|
| SavingParametersNotSupported | Saving parameters not supported.
|
| MediumNotPresent | Medium not present.
|
| MediumNotPresentTrayClosed | Medium not present - tray closed.
|
| MediumNotPresentTrayOpen | Medium not present - tray open.
|
| MediumNotPresentLoadable | Medium not present, loadable.
|
| MediumDestinationElementFull | Medium destination element full.
|
| MediumSourceElementEmpty | Medium source element empty.
|
| EndOfMediumReached | End of medium reached.
|
| MediumMagazineNotAccessible | Medium magazine not accessible.
|
| MediumMagazineRemoved | Medium magazine removed.
|
| MediumMagazineInserted | Medium magazine inserted.
|
| MediumMagazineLocked | Medium magazine locked.
|
| MediumMagazineUnlocked | Medium magazine unlocked.
|
| MechanicalPositioningOrChangerError | Mechanical positioning or changer error.
|
| InvalidBitsInIdentifyMessage | Invalid bits in identify message.
|
| NotSelfConfigured | Logical unit has not self-configured yet.
|
| LogicalUnitFailure | Logical unit failure.
|
| TimeoutOnLogicalUnit | Timeout on logical unit.
|
| TargetOperatingConditionsHaveChanged | Target operating conditions have changed.
|
| MicrocodeHasBeenChanged | Microcode has been changed.
|
| ChangedOperatingDefinition | Changed operating definition.
|
| InquiryDataHasChanged | Inquiry data has changed.
|
| MessageError | Message error.
|
| InternalTargetFailure | Internal target failure.
|
| SelectOrReselectFailure | Select or reselect failure.
|
| UnsuccessfulSoftReset | Unsuccessful soft reset.
|
| ScsiParityError | SCSI parity error.
|
| InitiatorDetectedErrorMessageReceived | Initiator detected error message received.
|
| InvalidMessageError | Invalid message error.
|
| CommandPhaseError | Command phase error.
|
| DataPhaseError | Data phase error.
|
| FailedSelfConfiguration | Logical unit failed self-configuration.
|
| OverlappedCommandsAttempted | Overlapped commands attempted.
|
| EraseFailure | Erase failure.
|
| EraseFailureIncompleteEraseOperationDetected | Erase failure, incomplete erase operation detected.
|
| MediaLoadOrEjectFailed | Media load or eject failed.
|
| MediumRemovalPrevented | Medium removal prevented.
|
| SystemResourceFailure | System resource failure.
|
| UnableToRecoverTableOfContents | Unable to recover table-of-contents.
|
| OperatorRequestOrStateChangeInput | Operator request or state change input.
|
| OperatorMediumRemovalRequest | Operator medium removal request.
|
| OperatorSelectedWriteProtect | Operator selected write protect.
|
| OperatorSelectedWritePermit | Operator selected write permit.
|
| LogException | Log exception.
|
| ThresholdConditionMet | Threshold condition met.
|
| LogCounterAtMaximum | Log counter at maximum.
|
| LogListCodesExhausted | Log list codes exhausted.
|
| FailurePredictionThresholdExceeded | Failure prediction threshold exceeded.
|
| MediaFailurePredictionThresholdExceeded | Media failure prediction threshold exceeded.
|
| UnitFailurePredictionThresholdExceeded | Logical unit failure prediction threshold exceeded.
|
| SpareAreaExhaustionFailurePredictionThresholdExceeded | Spare area exhaustion failure prediction threshold exceeded.
|
| FailurePredictionThresholdExceededFalse | Failure prediction threshold exceeded (false).
|
| LowPowerConditionOn | Low power condition on.
|
| IdleConditionActivatedByTimer | Idle condition activated by timer.
|
| StandbyConditionActivatedByTimer | Standby condition activated by timer.
|
| IdleConditionActivatedByCommand | Idle condition activated by command.
|
| StandbyConditionActivatedByCommand | Standby condition activated by command.
|
| EndOfUserAreaEncounteredOnThisTrack | End of user area encountered on this track.
|
| PacketDoesNotFitInAvailableSpace | Packet does not fit in available space.
|
| IllegalModeForThisTrack | Illegal mode for this track.
|
| InvalidPacketSize | Invalid packet size.
|
| VoltageFault | Voltage fault.
|
| AuthenticationFailure | Copy protection key exchange failure.
Authentication failure.
|
| KeyNotPresent | Copy protection key exchange failure.
Key not present.
|
| KeyNotEstablished | Copy protection key exchange failure.
Key not established.
|
| ReadWithoutAuthentication | Read of scrambled sector without authentication.
|
| RegionCodeMismatch | Media region code is mismatched to logical unit region.
|
| RegionResetError | Region reset count error.
Logical unit region must be permanent.
|
| InsufficientBlockCount | Insufficient block count for binding nonce recording.
|
| ConflictInBindingNonceRecording | Conflict in binding nonce recording.
|
| SessionFixationError | Session fixation error.
|
| SessionFixationErrorWritingLeadIn | Session fixation error writing lead-in.
|
| SessionFixationErrorWritingLeadOut | Session fixation error writing lead-out.
|
| SessionFixationErrorIncompleteTrackInSession | Session fixation error, incomplete track in session.
|
| RegionPartialReservedTrack | Empty or partially written reserved track.
|
| NoTrackReservations | No more track reservations allowed.
|
| RmzExtensionNotAllowed | Rmz extension is not allowed.
|
| NoMoreTestZoneExtensionsAreAllowed | No more test zone extensions are allowed.
|
| CDControlError | Cd control error.
|
| PowerCalibrationAreaAlmostFull | Power calibration area almost full.
|
| PowerCalibrationAreaFull | Power calibration area is full.
|
| PowerCalibrationAreaError | Power calibration area error.
|
| ProgramMemoryAreaUpdateFailure | Program memory area update failure.
|
| ProgramMemoryAreaFull | Program memory area is full.
|
| RmaPmaAlmostFull | RMA/PMA is almost full.
|
| CurrentPowerCalibrationAreaAlmostFull | Current power calibration area is almost full.
|
| CurrentPowerCalibrationAreaFull | Current power calibration area is full.
|
| RdzFull | RDZ is full.
|